IPS Soft Pliers Center Punch Carbide Do not apply impact to

Do not apply impact to this tool by hitting it with a hammer

Outside Dia - 190mm)

MITUTOYO Long Jaw Vernier Caliper Series 534

5 kA at 220/230/240 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 150 A at 50 °C Protection type Overload protectionShort-circuit protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 10000 cycles Electrical durability Category A: 5000 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 35 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 165 mm Width 105 mm Depth 60 mm Environment Standards GB/T 14048

IPS Soft Pliers Center Punch Carbide Do not apply impact toIPS Soft Pliers Soft Pliers supplied by IPS, sourced through official Korean distribution. Available Sizes PH 200(PVCCover) PH 165 (PVCCover) PP 230G NH 165 NWH 175 PP 230DS NWH 190D NPH 165 Specifications Size 8 Max Jaw Opening (mm) 25 Cutting Capacity (mm) 2 Width Adjustment 2 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size. About IPS IPS is a Korean manufacturer specialising